主營介電強度試驗機

_{介電強度試驗機，擊穿電壓試驗機，耐電壓擊穿強度試驗機}

_{產品型號：BDJC-50KV
控制方式：微機控制
一、滿足標準：
          GB1408-2006 絕緣材料電氣強度試驗方法 
          GB/T1695-2005 硫化橡膠工頻電壓擊穿強度和耐電壓強度試驗
          GB/T3333 電纜紙工頻電壓擊穿試驗方法
          HG/T 3330絕緣漆漆膜擊穿強度測定法
          GB12656 電容器紙工頻電壓擊穿試驗方法
          ASTM D149 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度的試驗方法.}
二、適用范圍及功能
_{主要適用于固體絕緣材料（如：塑料、橡膠、薄膜、樹脂、云母、陶瓷、玻璃、絕緣漆等介質）在工頻電壓或直流電壓下擊穿強度和耐電壓的測試。
由電腦控制，通過我公司自主研發的全新智能數字集成電路系統與軟件控制系統兩部分來完成，使升壓速率真正做到勻速、準確，并能夠準確測出漏電電流的數據。
可實時動態繪制試驗曲線，顯示試驗數據，判斷準確，并可保存，分析，修改，打印試驗數據。
1、本儀器在試驗過程中可對升壓擊穿過程繪制實時曲線，每次試驗的升壓曲線都由不同顏色構成，試驗結束后可疊加對比材料的試驗數據重復性。
2、可以隨時調取當前及歷史試驗數據進行查看，編輯及修改實驗結果。
3、試驗過程中可以隨時修改試驗條件及存儲路徑及自動存儲試驗結果。
4、試驗過程中，可隨時通過軟件決定本次試驗是否有效，方便篩選試驗結果。
5、可對軟件設置密碼，生成密碼保護，做到專機專人操作，避免無關人員誤操作。
6、 可對試驗結果編輯修改后打印，方便操作 更加人性化。
7、可對一組試驗中曲線數據的試驗結果是否進行人為選定 。
8、本儀器采用*無觸點原件勻速調壓方式，淘汰同類產品中機械傳動升壓方式。}
三、技術要求：
_{01、輸入電壓： 交流 220 V
02、輸出電壓： 交流 0--50 KV ; 
               直流 0—50 KV
03、電器容量： 3KVA
04、高壓分級： 0-10KV，0--50KV，
05、升壓速率： 100V/S 200V/S 500 V/S 1000 V/S 2000V/S  5000V/S 等
              （備注：滿足標準要求并可以根據用戶需求設定不同的升壓速率）
06、試驗方式：
           直流試驗：1、勻速升壓  2、梯度升壓 3、耐壓試驗 
           交流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗
07、試驗介質：空氣，試驗油
08、安裝靈敏度較高的過電流保護裝置保證試樣擊穿時在0.05S內切斷電源。
09、采用智能集成電路進行勻速升壓。
10、支持短時間內短路試驗要求。
11、電壓試驗精度： ≤ 1％。
12、試驗電壓連續可調： 0--50KV。
13、電流可采集到m*。
14、出具*計量單位校準檢定證書或出具客戶計量單位的證書。
15、電源：220V±10%的單相交流電壓和50Hz±1%的頻率。
16、電流電壓穩定度: 外界電源電壓波動10%時
四、 安全保護
電路保護控制：（1）超壓保護 （2）過流保護 （3）短路保護（4）漏電保護 （5）軟件誤操作保護
高壓輸入回路斷電保護控制： （1）總電源開關  （2）調壓器復位開關 （3）高壓斷電開關 （4）試驗箱門安全開關 （5）高壓回路開關（6）漏電保護開關
五、標準配置
01 試驗主機 一臺   
02 控制裝置 一套   
03 試驗電極 二套（國標1408.1）   
04 試驗油箱 二只   
05 放電系統 一套   
06 控制系統 一套   
07 數據采集系統 一套   
08 試驗軟件 一套 光盤 
09 計算機 一套 品牌 
10 噴墨打印機 一臺 品牌 
11 產品使用說明書 一份   
12 計量證書 一份   
13 產品合格證 一份   
六、設備安全說明：
1、設備要安裝單獨的保護地線。接保護地線，主要是減少試樣擊穿時對周圍產生的較強的電磁干擾。也可避免控制計算機失控。
2、該試驗設備的電路設有多項保護措施，主要有：過流保護、失壓保護、漏電保護、短路保護、直流試驗放電報警等。
3、接地要求： 儀器需要單獨接地，接地附合國家標準要求，金屬棒深埋地下至少要1.5米以下。
4、該試驗設備的電路設有多項保護措施，主要有：過流保護、失壓保護、漏電保護、短路保護、直流試驗放電報警等。
七、常規型號為：
                  BDJC-10KV 
                  BDJC-20KV 
                  BDJC-30KV 
                  BDJC-50KV 
                  BDJC-100KV}

The dielectric strength test machine, the breakdown voltage tester, resistance tester voltage breakdown strength

Product type: BDJC-50KV

Control mode: microcomputer control

One, meet the standards:

Methods of test for electric strength of insulating material GB1408-2006

GB/T1695-2005 vulcanized rubber power frequency voltage breakdown strength and voltage withstand strength test

GB/T3333 cable paper power frequency voltage breakdown test method

HG/T 3330 insulating paint breakdown strength determination

GB12656 capacitor paper power frequency voltage breakdown test method

Test method for materials at commercial power frequencies the dielectric breakdown voltage and dielectric strength of ASTM D149 solid electrical insulation.

Two, applicable scope and function

Mainly applicable to solid insulation materials （such as: plastic, rubber, film, resin, mica, ceramic, glass, insulating paint and other media） in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test.of the new inligent digital integrated circuit and software developed by our company, so that the pressure rate truly uniform, accurate, and can accuray measure the leakage current data.

Real time dynamic drawing test curve, test data show that, to judge accuray, and can save, analysis, modify, print the test data.

1, the instrument can boost the breakdown process in real time curve drawing during the test, each test boost curve are composed of different color, after testing can be superimposed contrast material testing data repeatability.

2, can obtain the current and historical test data to view, edit and modify the experimental results.

3, the test process can modify the test conditions and storage path and automatic storage test results at any time.

4, in the process of test, may at any time through the software determines the test is effective, convenient screening test results.

5, you can set the password for the software, generate the password protection, do special person operation, to avoid irrelevant personnel misoperation.

6, the test results edited print, convenient and more user-friendly operation.

7, test of a group of test curve data results are artificially selected.

8, the instrument adopts the advanced contactless original uniform pressure, elimination of the mechanical drive boosting mode similar products.

Three, the technical requirements:

01, the input voltage: AC 220 V

02, the output voltage: AC 0--50 KV;

DC 0 - 50 KV

03, electrical capacity: 3KVA

04, high grade: 0-10KV, 0--50KV,

05, the rate of pressure rise: 100V/S 200V/S 500 V/S 1000 V/S 2000V/S 5000V/S

（Note: meet the standard requirements and can be set to boost rates of different according to the user demand）

06, test methods:

DC test: 1, 2, 3 speed boost pressure gradient, pressure test

AC test: 1, 2, 3 speed boost pressure gradient, pressure test

07, the test medium: air, oil test

Over current protection device 08, the installation of high sensitivity to cut off the power supply to ensure the sample breakdown in 0.05S.

09, using an inligent integrated circuit speed boost.

10, support for a short time short-circuit test requirements.

11, voltage test accuracy: ≤ 1%.

12, the test voltage is continuous and adjustable: 0--50KV.

13, the current can be collected to class mA.

14, issued by the national level units of measurement calibration verification certificate issued or customer designated units of measurement certificate.

15, power: 220V ± 10% single-phase AC voltage and frequency of 50Hz + 1%.

16, the current and voltage stability: the external power supply voltage fluctuation 10%

Four, security protection

Circuit protection control: （1） the overpressure protection （2） overcurrent protection, short-circuit protection （3） （4） （5） leakage protection misoperation of protection software

High voltage input circuit power-off protection control: （1） the total power switch （2） regulator reset switch （3） high voltage switch （4） test box door safety switch （5） high voltage circuit switch （6） leakage protection switch

Five, the standard configuration

The 01 test a host

02 a set of control device

03 the test electrode two （GB 1408.1）

The 04 test tank two

The 05 discharge system

06 a set of control system

07 data collection system

The 08 Test Software CD

09 computer a set of brand

The 10 one ink-jet printer brands

11 using a manual

A 12 measurement certificate

13 product certificate

Six, equipment safety instructions:

1, equipment to install a separate protective ground. Grounding protection wire, mainly is the strong electromagnetic interference to reduce the sample breakdown when the surrounding the. Also avoid control computer control.

Circuit 2, the test equipment is provided with a number of protective measures, mainly include: over current protection, under voltage protection, leakage protection, short-circuit protection, DC discharge alarm.

3, grounding requirements: instruments require a separate grounding, grounding of a national standard requirements, metal rods buried at least 1.5 meters below.

Circuit 4, the test equipment is provided with a number of protective measures, mainly include: over current protection, under voltage protection, leakage protection, short-circuit protection, DC discharge alarm.

Seven, the conventional model:

BDJC-10KV

BDJC-20KV

BDJC-30KV

BDJC-50KV

BDJC-100KV